/ep_edm/en/contect_1059.html SHINI PLASTICS TECHNOLOGIES, INC.

New Product Launch

2016 Quarter 2 Issue 27

Mold Sweat Dehumidifier SMD-3000H

Share to:
Features 

The max. airflow of SMD-3000H can reach 3000m3/h with lowest dew-point of -10℃(14℉).

There’s a cooler at the drying air outlet with highest temperature can be reduced to 16℃(60.8℉). It keeps mold surface free from moisture condensation when molding cycle time reduced, which improves plastic products quality and increases production efficiency. 

There’s a pump in the condensation water tank, when liquid level reaches the specific height in the tank, the pump starts to drainage the condense water out of the tank. Therefore, it prevents the mass accumulated liquid from affecting the machine’s performance.   

Performance-Price Ratio 

most new models employ the multi-blades centrifugal blowers, which possess the same airflow but lower total power. By the way of adding cooler at the air outlet and water drainage function of the pump, it makes the dehumidifying performance more stable and obtains higher performance-price ratio.      

Application 

SMD series is the most commonly used application to free mold from condensation. The used of chilling water has directly result of shortened molding cycle time. As result, mold condensation appears. Employ the mold sweat dehumidifier can prevent mold from generating the condensation and avoid the influence by season varies, which largely lowers the deficiency.

New Product Launch

If you want to read other articles, back to2016 Quarter 2 Issue 27.