Because the addition of color masterbatch, recycled material and additives is necessary for the plastics molding process, the importance of metering blenders can not be emphasize too much. Its metering accuracy varies according to different finished products.
Based on the SCM series models, Shini succeeded in exploited a new “Standard” Volumetric Doser—SCM-E series.
The main features of SCM-E include: meet the requirement of external signal input simultaneously, connect external collosol signal is necessary when it is used for IMM and connecting external 0~10V simulate signal when used for EMM; adopts nickel plating treatment with screw to strengthen hardness of surface with antirust processing so that it has durability in use; a modular assembly makes it convenient for dismounting, also easy for cleaning and replacement; standard base of single color doser is equipped with three-tube hopper magnet to avoid damage of molding machine screw; mixer is the standard equipment of double-color doser, which meet client’s requirement of mixing two different materials and mixer is also optional for single-color doser to mix material evenly; compared with standard doser, the machine can ensure an accuracy of ±1 percent on the premise of cost reduction.
If clients bought SCM-E previously and wanted to change it for standard SCM, they should buy the brushless DC motor used for SCM and electric cabinet, then replace corresponding devices with both of them in SCM-E;
If clients did not select the mixing equipment at first but the mixing equipment is needed later, they should re-install mixer motor and electrical element and rewire according to main circuit.