- Home
- News
- New Products
- Dual-purpose Water/Oil Heater STM-W/O
Dual-purpose Water/Oil Heater STM-W/O
2021-09-29
-
Adopt water or oil as the heat transfer medium, the maximum operating temperature for water is 90℃/203℉, and oil is 160℃/320℉.
-
4.3" Touch screen controller with easy to use HMI and clean display.
-
P. I. D multi-stage temperature control system can maintain a mould temperature with an accuracy of ±0.5℃/0.9℉.
-
Programmable heating capacity in 3kW, 6kW, or 9kW via HMI.
-
Pump reverse function for mould drain.
-
Vacuum mode for leak stop function.
-
Multiple safety devices including power reverse phase protection, pump overload protection, overheat protection, and low level protection.
-
Modbus RTU data communication via RS485.
-
Return water or oil temperature is available as an option, and add "TS" at the end of the model code.
-
Digital flow meter is available as an option, and add "V" at the end of the model code.
-
Digital pressure gauge is available as an option, and add "P" at the end of the model code.